Module Installation
7.
Connect the video cable to the video cable port. The video
cable port is reference number
%
in Figure 1 and Figure 2.
Important
The video cable should be connected with only a shielded
data cable with an integrated ferrite bead over the
cable. If this port is connected with a cable without
such a ferrite bead, then clamp the snap-on ferrite bead
provided in your parts kit on the video cable next to the
cable connector near the system unit.
8.
Connect the optional stereoscopic cable to the stereo cable
port. The stereo cable port is reference number
$
in Figure 1
and Figure 2.
9.
Connect your video monitor as described in your system
documentation.
10. Plug the power cord into the wall outlet. Turn on the
external devices and the system.
14
