9
Headphone socket i.e. port (e) is another audio output option for car stereo to receive
the DAB contents. Note that the Mini USB port (f) is only for software upgrade of the unit.
It is intended for service professionals, not for general public.
Once completed, one can turn on the vehicle and the LED on IR receiver will be ON as a
“power ON” indication to remind users the power is running through the unit.
Note. Please make sure that the unit is fastened tightly and securely. If the unit is loose and dangling, it
may result in malfunction
1.
Please make sure that all the wire connections are securely made by inserting jacks until they lock
completely.
2.
If your vehicle’s ignition does not have an ACC position, or if the ignition wire is connected to a power
source with constant voltage such as battery wire, the power will not be linked with the ignition (i.e.,
it will not turn on and off along with the ignition). If you want to link the unit’s power with the ignition,
connect the ignition wire to a power source that can be turned on and off with the ignition key.
3.
If the fuse blows, first make sure that the wires have not caused a short circuit, then replace the old
fuse with one with the same rating.
4.
Insulate unconnected wires with vinyl tape or other similar material. To prevent short circuits, also
do not remove the caps on the ends of the unconnected wires of the terminals.
Headphone socket
connects to audio
output
Upgrade port (mini
USB)
FM output to the car
monitor
(e)
(f)
(g)
