3–2
Operation
The following shows the connection to a VMS node named MYNODE.
->
MYNODE
Return
................
%DS90L-100, Connection Established
Welcome to MYNODE running VMS 5.4
Username:
NOTE
The DECserver 90L does not require the configuration of group
codes. The first time it connects to a service it learns the service
name. This can take up to 60 seconds.
The terminal session is established and control is passed to the specified
node (assuming the node is available). If you do not know your node
name(s), ask your system manager.
When a terminal session is established, most systems start some type
of log in sequence, such as prompting you for username and password.
Refer to the documentation for your specific system for information about
starting a session.
Ending a Terminal Session
A terminal session is ended by logging off or disconnecting from the
system on which your terminal session was running. Logging off a system
ends your terminal session and returns you to the DECserver 90L prompt.
The following example shows what happens when a user logs off the
VAX/VMS node MYNODE.
$
LO
Return
USER logged out at 01-JAN-1991 16:55:00.00
-> %DS90L-107, Session Disconnected
->
