Management
4–9
Example: The expected response of a SHOW ADDRESS command to a
valid address is shown.
DECbridge>
SHOW AD 2
Address 2: 08-00-2B-10-20-30 hub 2 slot 8 port 4
Example: The expected response of a SHOW ADDRESS command for a
range of address is shown.
DECbridge>
SHOW AD 2,6
Address 2: 08-00-2B-10-20-30 hub 2 slot 8 port 4
Address 5: 08-00-2B-10-6A-31 hub 2 slot 3 port 3
Address 6: 08-00-2B-A6-43-17 hub 1 slot 3 port 5
SHOW PORT [hub number,] slot number, port number
Shows whether the port is enabled or disabled and lists the operating
status of the port. The hub number may be 1 or 2, and the slot numbers
may be 1 to 8. For the DECrepeater 90C, port numbers are 1 to 6.
Example: The expected response to a SHOW PORT command is shown.
The hub was not defined in the command, so the default (1) was used.
DECbridge>
SHOW PORT 3,2
Hub 1 slot 3 port 2 segment counter 0 status: disabled-no
carrier loopback
Example: A SHOW PORT command for hub 2 is shown.
DECbridge>
SHOW PORT 2,3,2
Hub 2 slot 3 port 2 segment counter 0 status: operational
SHOW REPEATER [[hub number,] slot number]
Shows the type of repeater and the port status for each port on that
repeater. The hub number may be 1 or 2, and slot numbers may be 1 to 8.
If you do not include parameters, the command displays information for
all repeaters in both hubs.
Example: The expected response of a SHOW REPEATER command
is shown. Note that DECrepeater 90T and DECrepeater 90C units are
installed in the hub.
DECbridge>
SHOW REP
Hub 1 slot 3 twisted pair repeater, rev.1, 8 ports.
Hub 1 slot 4 ThinWire repeater, rev.1, 6 ports.
Hub 2 slot 3 ThinWire repeater, rev.1, 6 ports.
Hub 2 slot 6 twisted pair repeater, rev.1, 8 ports.
Hub 2 slot 8 twisted pair repeater, rev.1, 8 ports.
