4–4
Management
After the name and node number is assigned, you can establish the link
at any time by using the ccr command:
#
ccr -n DBRG1 -h 08-00-2b-01-23-45 -c sva-0
In this example, the -h qualifier is followed by the station address of the
DECbridge unit to be attached. The -c qualifier is followed by the name
of the Ethernet circuit to use for the connection. The following Ethernet
circuit names, based on system type, apply:
System
Ethernet Circuit Name
VAX 6000 and 9000 XMI computers
mna-0
BI-based systems (VAX 6300 and
VAX 6400 computers)
bna-0
VAX 4000 computer series
isa-0
MicroVAX/3600/3900
qna-0
VAXstation 2000 and 3000
computer series
sva-0
VAX–11/780 and VAX–11/785
computers(UNIBUS)
una-0
Console Carrier User Interface
The DECbridge 90 is not shipped with a preset password, so no password
prompt displays when you connect for the first time. For secure operation
of the DECbridge 90, you should define a password using the DEFINE
BRIDGE PASSWORD command.
The password prompt is represented by the pound sign (#). If you do not
define a password, the password prompt does not display when you log in.
You have three attempts to enter a password; if all three attempts fail,
you must disconnect and try again.
After you enter the correct password, or if there is no password, the
DECbridge console carrier management banner and prompt display on
the screen:
Copyright © Digital Equipment Corporation 1991.
DECbridge 90 V1.0 25-JAN-1991 08-00-2B-01-23-45
Flash EPROM V1.0 31-JAN-1991
DECbridge>
