Disabling the Floppy Controller
Disabling the Floppy Controller
Disabling
the Floppy
Controller
If you are installing a second SCSI adapter in the system, you
must disable the floppy disk controller on the second SCSI
adapter. To disable the floppy controller, remove the jumper from
pin number 1 of J6 on the SCSI adapter. Figure 1–1 shows the
default position of the jumper.
Figure 1–1 Disabling the Floppy Controller
GA_EN00500A_93A
1 2 3 4 5 6
J6
Installing the SCSI Adapter 1–3