3-32
Installing an Expander Cabinet
3.16 Connect the DSSI Cables
Figure 3-16 DSSI Cable Connection
VAX
7000
Connect the DSSI cable between the I/O bulkhead and the
disk bricks. Connect the disk brick cables and termina-
tors. The configuration shown here is only one of many
possible configurations; the I/O bulkhead shown is in the
bottom rear of the system cabinet and the disk bricks are
in the upper front of the expander cabinet. The installa-
tion guidelines here, however, are generally applicable.
BXB-0032E-92
Front
Expander
Rear
System
