7
4.
Termination of the right of use
(1) The licensee can at any time terminate the right to use the product by expunging
or destroying the product and all the copied contents.
(2) When a licensee contravenes these license contents, DMC can notify the
licensee of termination of the right to use the product. In this case, the licensee
shall return the product or all the copied contents to DMC within one month.
5.
Limited Warranty
(1) DMC guarantees that 90 days after the licensee purchased the product, neither
material nor manufacturing flaws shall be found at the medium where the
product has been recorded or stored. If any errors related to the material or
manufacturing is recognized when the product is installed, we shall replace the
medium used to install the product on the condition that we are notified of it
within the guaranteed period.
(2) DMC shall grant the right to use the product at a state it has been supplied
without explicit or implicit guarantee except for replacement of the medium
containing product described in the above clause. Further, we do not guarantee
that the product is suitable as useful for the licensee’s specific purpose of use and
that execution of the product is neither interrupted nor an error is found at its
execution.
(3) The responsibility attributable to DMC based on this agreement is limited to
replacement of the medium containing the product, and DMC shall not assume
any responsibility for the explicit or implicit guarantee including the other legal
warranty against a defect and a liability for reparation given from a third party to
the licensee regarding the licensee’s profit loss caused by the product, damage
arising from a special circumstance and the damage against data or intangible
property right.
6.
Licensee’s obligation
The licensee shall recognize that the product shall possess the confidential
information or property information including the intangible property right protected
by the Copyright Act and shall not take the following actions:
(1) Use and copying of the product against the terms of the license and
disassembling, reverse engineering, and modifying the product.
(2) Transfer, leasing and sublicensing of the product to the third party.
(3) Deletion and/or change of display of the intangible property right including the
copyright displayed on the medium containing the product.
Summary of Contents for PS-3650A Series
Page 20: ...20 Memo ...
