6
When attaching the HDD to the PS-3451A
(1) Unscrew the screws (2) of the HDD
cover and remove the HDD cover.
When replacing the cover, the torque
required for these screws is 0.5 to 0.6
N
•
m.
(2) Unscrew the screws (4) of the HDD unit,
remove the cable connector from IDE I/F
while lifting up the HDD unit, and
remove it.
To replace the HDD unit, connect the
cable connector to IDE I/F securely and
fix the HDD unit with the screws (4).
The torque required for these screws is
0.5 to 0.6 N
•
m.
IDE I/F
Inside of the PS-3451A' s rear
