FP3700-T41 User Manual
3-17
3.3 Operation Mode Setup and Display Positioning
SAVE
Saves all the adjusted settings in the EEPROM.
•
In the OSD, pressing the
button applies the set value and enables
the setting. The set value won't be canceled unless the power is turned
OFF or the value is reset.
If the power is turned OFF without saving the set value, that data will
disappear. The last saved data will be read into the system when the
FP starts. To enable the changed value, be sure to press the
SAVE
but-
ton.
•
When the OSD automatically closes after 30 seconds of inactivity, the
set value that you were modifying at the time will be retained. If you
quit the OSD with the
button, the value that you were modifying
will be not be retained. Instead, the previously set value will be used.
