Quick Reference Guide
Version and status information. All items in this section are valid only for a get command.
get boot firmware version number:
verboot
get main CPU firmware version number:
vercpu
get DSP1 firmware version number:
verdsp1
get DSP2 firmware version number:
verdsp2
get all configuration settings:
all
Input channel controls.
get or set digital input volume:
iv0
get or set analog input volume:
iv1
change digital input volume by specified value (valid for set only):
iv0step
change analog input volume by specified value (valid for set only):
iv1step
get or set digital input mute control:
imute0
get or set analog input mute control:
imute1
get or set digital input enable mask :
dienab
Output channel controls.
get or set output volume:
ov
change output volume by specified value (valid for set only):
ovstep
get or set output mute control:
omute
get or set output EQ frequency for bass EQ band (low shelving):
eqf0
get or set output EQ frequency for mid 1 EQ band (peak/dip EQ):
eqf1
get or set output EQ frequency for mid 2 EQ band (peak/dip EQ):
eqf2
get or set output EQ frequency for mid 3 EQ band (peak/dip EQ):
eqf3
get or set output EQ frequency for treble EQ band (high shelving):
eqf4
get or set output EQ boost/cut for bass EQ band:
eq0
get or set output EQ boost/cut for mid1 EQ band:
eq1
get or set output EQ boost/cut for mid2 EQ band:
eq2
get or set output EQ boost/cut for mid3 EQ band:
eq3
get or set output EQ boost/cut for treble EQ band:
eq4
get or set output EQ Q for mid 1 EQ band:
eqq1
get or set output EQ Q for mid 2 EQ band:
eqq2
get or set output EQ Q for mid 3 EQ band:
eqq3
get or set output compressor's threshold:
cpthr
get or set output compressor's compression ratio:
cprat
get or set output compressor's attack time:
cpatt
get or set output compressor's release time:
cprel
get or set output compressor's make-up volume:
cpmak
get or set stereo effect setting:
steff
get or set left/right output crossover filter type:
xomtype
get or set subwoofer output crossover filter type:
xostype
get or set left/right output crossover frequency:
xomf
get or set subwoofer output crossover frequency:
xosf
get or set output crossover high-pass filter enable:
xohpf
get or set left/right output speaker offset:
spmoff
get or set subwoofer output speaker offset:
spsoff
System / configuration controls.
load preset (valid for set only):
lprs
save preset (valid for set only):
sprs
reboot amplifier (valid for set only):
reboot
get or set sleep delay time:
sleepdly
!
!
!
!
!
!
!
!
!
!
!
!
34
