background image

WARRANTY AND SERVICE

DIGITAL AUDIO LABS LIMITED WARRANTY

Digital Audio Labs warrants their products against defects in material and workmanship for a period of two years 
from date of purchase. During this period, Digital Audio Labs will, at its option, repair the defective unit or replace 
it with a new or rebuilt one.

The warranty does NOT cover:
• Damage due to abuse, misuse, or accident.
• Damage due to operation contrary to the instructions in the product instruction manual.
• Units on which the product serial number has been removed or altered.
• Units that have been serviced by unauthorized personnel.

All implied warranties, including warranties on merchantability and fitness, are limited in time to the length of this 
warranty. Some states do not allow time limitations on implied warranties, so this limitation may not apply to you.  
Digital Audio Labs' liability is limited to the repair or replacement of its product. Digital Audio Labs shall in no way 
be held liable for incidental or consequential damages resulting from the use of their product or its software, 
including, without limitation, damages from loss of business profits, business interruption, loss of business 
information or other pecuniary loss. Some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitation or exclusion may not apply to you.

REPAIR POLICY
Please do not return the product without obtaining an RMA number first.

 Contact Digital Audio Labs at 

[email protected]

 to acquire an RMA number. Do not return the product to the place of purchase. Please 

write the RMA number on the outside of the shipping carton. Any product sent to us without a valid RMA number 
will be refused. Include the following with the product: a brief description of the problem, your name, return 
shipping address, phone number and the RMA number. Do not include any accessories. DAL is not responsible 
for any damage to or loss of the product during transit. We recommend that customers obtain a receipt and 
tracking number for all packages shipped to us. Turnaround time on repairs is generally ten business days. If you 
live outside of the United States, please contact your local distributor for warranty service.

Please return product to:
Digital Audio Labs
Attn: RMA Number
1266 Park Road
Chanhassen, MN 55317
USA

WARRANTY SERVICE

You will be required to pay the shipping charges when you ship your product to DAL. DAL will pay for return 
shipping via UPS ground. We reserve the right to inspect any product that may be the subject of any warranty 
claim before repair is carried out. For warranty service, we may require proof of the original date of purchase if 
you have not registered your product with DAL. Final determination of warranty coverage lies solely with Digital 
Audio Labs. Please refer to the warranty information included in this help file.

NON-WARRANTY SERVICE

If it is determined that the product does not meet the terms of our warranty, you will be billed for labor, materials, 
return freight and insurance. There is a $50 USD minimum charge for materials and labor. Appropriate shipping 
charges will be applied. We require payment in advance of repair by credit card; we accept Visa and Master Card.  
In the event the charges are over the minimum charge, DAL will contact you and inform you of the cost of the 
repair before any work is completed.

 

 

 

 

 

 

 

 

 

 

 

 

 

18

Summary of Contents for POWERSHAPE PS-2.1







































Reviews: