background image

LIVEMIX AD-24

SAFETY INSTRUCTIONS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE 

PARTS INSIDE. CONTACT DIGITAL AUDIO LABS FOR  SERVICING.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the 

user to the presence of un-insulated and/or potentially dangerous voltage within the products 

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence 

of important operating and maintenance (servicing) instructions in the literature accompanying 

the appliance.

POWER CORD NOTICE FOR INTERNATIONAL OPERATION

Please call Digital Audio Labs Support at 952-401-7700.

Important Safety Instructions

1.  Read and understand this entire manual.

2. 

Keep this manual available for reference.

3.  Heed all warnings and precautions in this manual and notices marked on the product.

4. 

Do not use this product near water or damp environments.

5. 

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

6. 

Provide for proper airflow around product. Do not install near products that produce high levels 

of heat. Do not expose the unit to direct sun light or heating units as the internal components’ 

temperature may rise and shorten the life of the components. 

7. 

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 

two blades with one wider than the other. A grounding type plug has two blades and a third 

grounding prong. 

8. 

Protect the power cord from being walked on or pinched particularly at plugs, convenience 

receptacles, and the point where they connect to the product. Do not use the unit if the electrical 

power cord is frayed or broken.

9. 

Only use attachments/accessories specified by the manufacturer.

10. Unplug this product during lightning storms or when unused for long periods of time.

11. 

Refer all servicing to qualified service personnel. There are no user serviceable components inside 

the product.

12. 

The product shall not be exposed to moisture. Do not touch the unit with wet hands. Do not 

handle the unit or power cord when your hands are wet or damp. 

13. 

The product should be connected to a power supply only of the type described in the operating 

instructions or as marked on the product.

Care

• 

From time to time you should wipe off the front and side panels and the cabinet with a dry soft 

cloth. Do not use rough material, thinners, alcohol or other chemical solvents or cloths since this 

may damage the finish or remove the panel lettering.

• 

The Livemix system is capable of delivering high levels of volume. Please use caution with 

volume levels, listen with the lowest possible volume for proper operation and avoid exposure to 

prolonged high volume levels. 

• 

The manufacturer cannot be held responsible for damages caused to persons, personal 

possessions, or data due to an improper or missing ground connection.

Summary of Contents for LIVEMIX AD-24















Reviews: