Digital Alert Systems DASDEC-III DAS3-EL, Quick Start Manual, Page: 3 / 21

DASDEC- III
Quick Start Guide
Page | 3 Rev: R10122022
Register your DASDEC-III
Register your DASDEC™ to stay up to date with the latest software and news regarding your DASDEC-III and future
changes. To register, fill out the form at https://www.digitalalertsystems.com/product-registration and submit. Or,
scan the QR code on the S/N label on the unit's rear panel to submit your information. You will be notified by email of
the latest updates and enhancements that can be downloaded from our website.
What comes with your DASDEC-III
Accessories included: power cord, network crossover cable, and rack mounting screws.
Items NOT included: Wiring for audio and RF connections. Note: ADAPTERS MAY BE REQUIRED to connect the audio
sources. For more information, see the section Program Audio and Monitor 4 Wiring – Analog/ AES Digital (page 9).
Getting Started – What you’ll need to have or know:
•
A PC, laptop, or tablet and an RJ45 networking cable.
• A valid, unused IP address. Speak with your network administrator for a proper IP address.
• The county names for the areas where the equipment will be installed and/or transmitting.
•
The radio frequencies for your Local Primary 1 (LP1) and Local Primary 2 (LP2). These can be
obtained from the state EAS plan or the State Emergency Communications Coordinator (SECC) for
your state. If applicable, you may also need the frequency for a NOAA radio station.