13
Operating With a 2-Digit Code:
When a 2-digit code sequence is selected on the 3185E the switch program will be as follows:
SWITCH 1
= first digit of code sequence for both 'ON' and 'OFF'.
SWITCH 2
= second digit of code sequence for 'ON'.
SWITCH 3
= second digit for code sequence for 'OFF'.
If the 3185E is programmed for momentary relay output or alternating relay action SWITCH 3 is
not used for programming.
Operating With a 1-Digit Code:
When a 1-digit code sequence is programmed into the 3185E the switch program is as follows:
SWITCH 1
= first digit of code sequence for 'ON'.
SWITCH 2
= first digit of code sequence for 'OFF'.
If the 3185E is programmed for momentary relay output or alternating relay action SWITCH 2 is
not used for programming.
ADJUSTMENT
Potentiometer
R12
permits the user to adjust the level of the received DTMF tones. This
adjustment would be made when the received audio levels are too low or too high to permit
reliable decoding. Setting
R12
fully counterclockwise will provide
-
10 dBmV of gain. Setting
R12
fully clockwise will p10 dBmV of gain.
Consult FIGURE 3 on page 7 for the location of potentiometer
R12
.
