26
Copyright © 2009 Digispider. All rights reserved.
www.digispider.net
7. Mixer: after getting through the mix enable, Input channel will enter a
matrix mixer. You can select several audio of inputting channels for mixing at a
certain output port via button in the matrix.
The auto mixer can adjust the mic level in every different output after a noise
test. For example, the mic level will be adjusted lowest in the nearest output for
reduce the feedback.
Right click the mouse then pop up the interface as follow:
Set Atrri to Default: set the mixer DSP parameters to default value.
Copy Atrri: Copy the mixer DSP parameters for the other device usage.
Paste Atrri: Paste the mixer DSP parameters from the other CFM.
Current Input Mix: open or close the all current input channel.
Current Output Mix: open or close the all current output channel.
All Mix: open or close the all mix channel.
Set Attributes: adjust the level of the channel.
AutoSet Attenuation: set the auto adjust mode for the CFM-1006.
In the auto mode, the user should open the all mic and speakers. The mixer will
be adjusted automatic after the auto test for
prevent potential feedback
problems
For example: