DigiSpec DTT-PRO, Operation Manuals

Page: 7 / 16

7
PROGRAMMING
TIME-DATE
Move the cursor by pressing the “ Up ” or “ Down ” button to the “ TIME-DATE ” selection and press the “ Select ” button.
The “ TIME-DATE ” menu will apprear.
TME-DATE SETTING
Move the cursor by pressing the “ Up ” or “ Down ” buttons to access the “ TIME-DATE ” selection and press the
“ Select ” button . The “ TIME-DATE ” menu will apprear and the month will flash. Press the “Up” or “Down” to
scroll through the available date and time formats. Press the “Select” button to select and move the cursor
following the sequence below.
There are 6 prompts associated with this set-up screen and they sequence in the order displayed:
MMM : Month displayed as (JAN, FEB, MAR,...... NOV, DEC)
DD : Date (1-31)
YY : Year (00-99). Note: the year 2000 is 00
HH : Hours (1-12 with AM/PM, or 00-23, depending on 12 or 24 time format)
MM : Minutes (00-59)
SS : Seconds (00-59)
T-D SETTING
TIME FORMAT 12 Hour
DATE FORMAT MMM-DD-YY
DST
OFF
EXIT
TIIME-DATE
T-DSETTING
JAN-01-08 8:00:00 A
TITLER SETUP
TIME - DATE
DISPLAY
EXIT
MAIN MENU
T-D SETTING
TIME FORMAT 12 Hour
DATE FORMAT MMM-DD-YY
DST
OFF
EXIT
TIIME-DATE
TITLER SETUP
MAIN MENU
TITLER SETUP
TIME - DATE
DISPLAY
EXIT
DTT-Pro (DATE/TIME TITLER)