DigiSpec DTT-PRO Operation Manuals Download Page 14

14

EXIT

Move the cursor by pressing the “

Up

” or “

Down

” buttons to the “

EXIT

” and press the “

Select

” button to go

back to the “

MAIN MENU

Video Loss Detection

When the video goes missing from the DTT-Pro, a red warning background (along with the “VL OUTPUT“ setting page 11)
will be displayed with the message flashing “VIDEO LOSS” in large characters. The Date and Time when the video went
missing will also be inserted under the “VIDEO LOSS” message. This will warn an operator of the video loss condition
and give the time and date of this occurrence. If the video is recorded to tape, the date and time will provide when the video
loss had occurred.

Press the “

UP

” or “

Down

” button to move up or down the  Video Loss message, Title and Date-Time display on the

screen.
Press “

Select

” button for going to the Programming mode

PROGRAMMING

Power down DTT-Pro by taking out the power line. Then press and hold the “

Up

” button and plug in the power. Hold the

Up

” button until the Copyright and Version display appear on the screen.

The internal rechargeable NiMH battery needs a full 24 Hr charge if fully discharged to be fully charged and hold memory
backup for 8 weeks.

Master Reset

JAN-01-10  8:00:00 A

VIDEO  LOSS

DTT AVE         NTSC

NOTE :

 

The Video Loss Message, Title and Date-Time can be set to ON or OFF. Please refer to page 11 and 12.

TITLER SETUP
TIME - DATE
DISPLAY
EXIT

MAIN MENU

TITLER                          ON
TIME-DATE

              ON

VL OUTPUT                 RED
GRAYSCALE
BORDER
EXIT

DISPLAY

WARNING!

DOING A MASTER RESET CLEARS ALL PROGRAMMING AND

THE DTT-Pro DEFAULTS TO THE FACTORY SETTINGS.

 DTT-Pro (DATE/TIME TITLER)

Summary of Contents for DTT-PRO

















Reviews: