DG-BG1100N User Manual
47
The following table describes the parameters of this page:
Field
Description
IP Address
Enter the IP address of LAN interface. It is recommended to use an
address from a block reserved for private use. This address block
is 192.168.1.1- 192.168.255.254.
IP Subnet Mask
Enter the subnet mask of LAN interface. The range of subnet mask
is from 255.255.0.0 to 255.255.255.254.
Dynamic Route
Select the Dynamic Routing Protocol as required.
Direction
You can select None, Both, IN Only or OUT Only.
Multicast
Select the IGMP Multicat Protcol or Disable it.
IGMP Snoop
You may select Activated or Deactivated. After Activating this
function, the packets of the IGMP broadcast will not be sent to the
LAN interface not belonging to the group.
Mld Snoop
You may select Enabled or Disabled. After Activating this function,
the packets of the MLD broadcast will not be sent to the LAN
interface not belonging to the group.
DHCP
You can choose Disabled, Enabled or Relay. If set to DHCP
Server, the router can assign IP addresses, IP default gateway and
DNS Servers to the host under Windows95, Windows NT and
other operation systems that support the DHCP client.
Starting IP Address
The starting IP address for the DHCP server's IP assignment.
IP Pool Count
The max user pool size.
Lease Time
The lease time determines the period that the host retains the
assigned IP addresses before the IP addresses change. The
default is 259200 seconds.
Physical Ports
Choose the Ethernet Interface for which you want to enable DHCP.
DNS Relay
You can choose Use Auto Discovered DNS Server Only or Use
User Discovered DNS Server Only. If you select Auto Discovered,
the router accepts the firstly-received DNS assignment from one of
the PPPoA, PPPoE or MER enabled PVC(s) during the connection
establishment. If you select User Discovered, enter the IP
addresses of the primary and secondary DNS servers.
Radvd Enable
You may choose to enable or disable Radvd. The Router
Advertisement Daemon (radvd) is an open-source software
product that implements link-local advertisements of IPv6 router
addresses and IPv6 routing prefixes using the Neighbor Discovery
Protocol (NDP).
