Digisol DG-PS1010U, User Manual

Page: 69 / 78

DG-PS1010U User Manual
69
Print server Reconfiguration Procedure on Windows NT
1. Click Start on the bottom left hand corner of the screen.
2. Select Settings and select Printers .
3.
Select your printer connected to the print server, and right-click the printer icon. Select
Properties .
4.
Click Ports tab.
5. Click Configure Port . The print server will be shown on the next screen.
6.
Find your original print server according to its Port Name or other distinguished name and
click this print server.
7. Click
OK and it returns to the printer’s Properties page.
8. Click OK .
9. Done!
Moving Your Computer to A New Segment
If you are using the print server through the Network Print Port on your NT or Windows 95/98/Me
computer and your computer is going to be moved onto another segment, you have to reconfigure
the print server on your computer to use your print server. However, this situation is like moving
the print server to a new segment. Please refer to the “
Moving the print server to a new segment ”
section for more detailed reconfiguration instructions.
Novell NetWare Troubleshooting
Many printing problems can be traced back to incorrect or incomplete print server installations. It
is always wise to check the installation configurations first.
In some cases, if necessary, delete the print server, print queue(s) or other setting(s). Next
recreate the necessary parameters or reconfigure the print server by running the PSAdmin.