DG-PS1010U User Manual
49
5. Network Print Monitor
Preparation
The print server supports
TCP/IP
,
IPX/SPX
and
NetBEUI
protocols under Windows computer.
Please make sure that the following steps have been completed before proceeding with
installation under Windows 95/98/ME/NT4/2000/XP 32bit edition/server 2003 32bit edition.
Select A Desired Protocol
TCP/IP
The TCP/IP Protocol must be installed. For further information, please read “
TCP/IP Protocol
Installation”
section in this chapter.
Note:
If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print server”
section later in this chapter.
IPX/SPX
The IPX/SPX-compatible Protocol must be installed. For further information, please read
“
IPX/SPX-compatible Protocol Installation”
section in this chapter.
NetBEUI
The NetBEUI protocol must be installed. For further information, please read “
NetBEUI Protocol
Installation”
section in this chapter. The Windows XP/2003/Vista/7 does not support the NetBEUI
printing.
TCP/IP Protocol Installation
1. Click
Start
, point to
Settings
and select
Control Panel
.
2.
Double click the
Network
icon.
3. If
the
TCP/IP
Protocol
is not already installed, click
Add
.
Summary of Contents for DG-PS1010U
Page 62: ...DG PS1010U User Manual 62 14 Choose the model of printer and click Forward Fig 51 15 Done...
Page 65: ...DG PS1010U User Manual 65 4 Click Browse and select the firmware file 5 Click Upgrade 6 Done...
Page 73: ...DG PS1010U User Manual 73 Fig 55 4 Now you have to install the printer s driver Fig 56...
