DG-FS1526 User Manual
6 Device Upgrade
You can upgrade software through any Ethernet port for DG-FS1526. After software
upgrade is complete, the system reboots automatically.
7 Web Configuration and Management
The system does not support the CLI and telnet management. It supports the web
management only. This section describes the web configuration and management.
7.1 Preparation Before Login
Before accessing the switch, ensure the communication between PC and switch is normal.
Check the communication as follows.
1.
Set the IP address of the PC to 192.168.2.X (2~254) and the subnet mask to
255.255.255.0.
2.
Enter
arp -d
or
arp -d 192.168.2.1
in the
DOS
window. See the following figure.
15
Summary of Contents for DG-FS1526
Page 23: ...DG FS1526 User Manual 23...
Page 35: ...DG FS1526 User Manual 35...
Page 40: ...DG FS1526 User Manual DG FS1526 User Manual 40 40...
