DVR User Manual
16
【
Channel
】
Choose the corresponding channel number to set the channel. Choose the “all” option to
set the entire channels.
【
Redundancy
】
Choose the redundancy function option to implement the file double backup
function.
Double backup is writing the video files in two hard disks. When you do the double
backup, make sure that there are two hard disks installed. One is read-write disk and the other is
redundant disk. (Refer to
【
Length
】
Set the time length of each video file. 60 minutes is default value.
【
PreRecord
】
Record 1-30 seconds before the action. (Time length is decided by the code stream)
【
Record mode
】
Set video state: schedule, manual or stop.
Schedule:
Record according to the set video type (Regular, detection and alarm) and time section.
Manual:
Click the manual button to record no matter what state the channels are in.
Stop:
Click the stop button to stop recording no matter what state the channels are in.
【
Period
】
Set the time section of common recording, The recording will start only in the set range.
【
Record type
】
Set the recording type: regular, detection or alarm.
Regular:
Perform the regular recording in the set time section. The video file type is “R”.
Detect:
Trigger the “motion detect”, “camera mask” or “video loss” signal. When above alarm is set
as opening recording, the “detection recording” state is on. The video file type is “M”.
Alarm:
Trigger the external alarm signal in the set time section. When above alarm is set as opening
recording, the “detection recording” state is on. The video file type is “A”.
Note
：
Refer to
to set corresponding alarm function.
