DG-BR4000N/E User Manual
95
The following table describes parameters in this page:
Item
Description
Turn Remote
Management
On
Enable or disable remote Web management.
Remote
Management
Address
IP address that is used to access the router from the Internet. The default
IP is
http://0.0.0.0:8080.
When accessing the router, you need to enter
the WAN IP address of the router, along with
:
and the port number in
the address bar (of IE) or the location bar (of Netscape).
Port Number
Specify the port of Web management for accessing the broadband router.
Allow Remote
Access By
Set the IP address of the computer on which remote Web management is
carried out to access the router.
•
Only This Computer: Only the specified IP address can access the
router. You need to enter an IP address.
•
IP Address Range: A number of IP addresses on the Internet can
access the router. You need to enter the starting
and ending IP addresses to specify the range.
•
Everyone: Everyone on the Internet can access the router.
After the settings are done, click Apply to save the settings.
