DigiPos SLK-TE201, Manual

Page: 12 / 13

21
20
9-2. Auto Cutter Specifications
(1) Cutting Frequency Max. 30 cuts per minute
(2) Thickness of paper 0.06 ~ 0.09 mm
(3) Cutter Life
SLK-TE201 SLK-TE202 SLK-TE202
Ⅱ
SLK-TE203
1.5 million cuttings 1.5 million cuttings 1.8 million cuttings 1.5 million cuttings
9-3. Interface
USB Interface (plus one more card selectable)
-RS232 Serial Interface
-Centronics Parallel Interface(IEEE1284)
-Ethernet Interface(100Mbps)
-Wi-Fi
-Bluetooth(ios)
9-4. Electrical Characteristics
(1) Input Voltage DC 24V ± 10%
(2) Current Consumption Operating: Approx. 1.75 A (at ASC ∥ printing)
Peak : Approx. 10 A
(at print duty 100%, For 10 seconds or less)
Stand-by : Approx. 0.03 A
(3) Power Connector
♣
Important!
When connecting or disconnecting the power supply from the printer, be sure that the
following cautions are observed.
(1) Use a power supply (Limited Power Supply) of DC 24V±10% and more than 1.75A.
(2) Be careful about installing the printer in an area where there is noise.
(3) Take the appropriate measure to protect against electrostatic AC line noise, etc.
9-5. Environmental Requirements
(1) Operating
Temperature
0°C to 45°C
Humidity 10% to 90% RH (without condensation)
(2) Transport/Storage (except paper)
Temperature
-20°C to 60°C
Humidity 10% to 90% RH (without condensation)
9-6. Reliability
(1) MCBF 60 million lines (based on an average printing rate of 12.5% with paper
thickness in the range of from 65µm - 75µm)
35 million lines (based on an average printing rate of 12.5% with paper
thickness in the range of from 76µm - 150µm)
(2) Head Life 160Km
(3) Cutter Life
SLK-TE201 SLK-TE202 SLK-TE202
Ⅱ
SLK-TE203
1.5 million cuttings 1.5 million cuttings 1.8 million cuttings 1.5 million cuttings
9-7. Certification
(1) FCC PART15 CLASS A
(2) UL/cUL (UL 60950-1)
(3) KC
(4) CE-EMCD (CE-EMCD Class B should use Parallel shield Cable complied with IEEE-1284 standards)
(5) ENERGY STAR
This equipment is indoor use and all the communication wirings are limited to inside of the building.
P A T E N T