background image

 

DigiPoS Millennium Technical Manual

 

SAFETY INSTRUCTIONS 
 

  Always read the safety instructions carefully. 

  Keep this Manual for future reference. 

  Keep this equipment away from humidity and dust. 

  Lay the equipment on a reliable flat surface before setting it up. 

  The openings on the enclosure are for air convection, hence protecting the equipment 

from overheating. DO NOT COVER THESE OPENINGS. For a more detailed 
explanation about ventilation requirements, please check the on-line documentation 
available at:  

http://www.digipos-systems.com/ 

  Make sure the voltage of the power source (mains) conforms within the permitted 

range before connecting the equipment to the power inlet. 

  Place the power cord in such a way that people cannot step on it. Do not place 

anything over the power cord. 

  ALWAYS shut down the operating system and disconnect the unit from any power 

sources before removing any connections (Keyboard, Mouse, etc..) or opening up the 
unit to fit additional cards and or devices. 

  All cautions and warnings on the equipment should be noted and adhered to. 

  Never pour any liquid into the opening that could damage or cause electrical shock. 

  If any of the following situations arise, have the equipment checked by qualified service 

personnel: 

o

  The power cord or plug is damaged 

o

  Liquid has penetrated into the DigiPoS 

o

  The equipment has been exposed to moisture 

o

  The DigiPoS is not working well or you can not get it to work according to the 

User’s Manual 

o

  The DigiPoS has been dropped and damaged 

o

  The DigiPoS has obvious signs of breakage or physical damage 

  Do not leave this DigiPoS in a non air-conditioned environment with a storage 

temperature above 60ºc (140ºf) as it may damage the equipment. 

  For reasons of safety, gloves should be worn when assembling the DigiPoS after any 

work has been carried out. 

 

NOTE 

  The technical descriptions and specifications of the DigiPoS Millennium are subject 

to change without notice.

 

 

ACHTUNG

 Wir behalten uns Änderungen der technischen Beschreibungen bzw. 

Spezifikationen vor. 

 

注意事項

 

 

本說明書所列規格僅供參考, 本公司保留產品修改變更之權利.

 

 

為了您的安全, 拆裝PC內部組件時請戴白手套以防割傷.

 

 

CAUTION 

 

Page 3 of 81 

Summary of Contents for Millennium Socket 370 Series


















































































Reviews: