3
Back View
Power On / Off switch
Back panel
Power cable connector
Expansion cards
Back Panel
Intel® AMT port
USB 3.0 (SS) ports (2)
USB 2.0 ports (2)
Ethernet RJ-45 port
DisplayPort**
Charging USB
ports (2)
Line-in,
Line-out,
Mic-in
connectors
DVI-I* monitor port
DVI-D monitor
port
1394 port
e-SATA port
* DVI-I port with a DVI to VGA adapter can connect to a VGA monitor.
** Using the DisplayPort for video may require an optional adapter to connect to older monitors which only support VGA and/or DVI. When connecting to
a DisplayPort monitor or adapter, multi-monitor capability of the system is not available during boot or when running DOS. Output will be limited to the
DisplayPort monitor only. When the system is booted to Windows and the graphics driver is loaded, multi-monitor support will be fully functional.
Expansion Cards
The
Di32
series chassis has no expansion cards.
The
DM32
series chassis has one expansion card: Video capture card with CH 1 - 16 in and Spot out 1, 2.
DH16 Series Expansion Cards
DH32 Series Expansion Cards
Video capture card
Ch 1 - 8 in
Ch 9 - 16 in
Sensor and Control,
RS485 Terminals
Spot out
Audio capture card:
Upper: Ch 9 - 16 in
Lower: Ch 1 - 8 in
Control 1
Sensor 1
Sensor 2
Sensor 3
Sensor 4
Control 2
Control 3
Ground
Ground
Control 4
RS485
TX+
TX–
RX+
RX–
Video capture cards
Ch 17 - 24 in
Ch 25 - 32 in
Ch 1 - 8 in
Ch 9 - 16 in
Audio capture card:
Upper: Ch 9 - 16 in
Lower: Ch 1 - 8 in
Sensor and Control,
RS485 Terminals
Control 1
Sensor 1
Sensor 2
Sensor 3
Sensor 4
Control 2
Control 3
Ground
Ground
Control 4
RS485:
TX+
TX–
RX+
RX–
Spot out
(Ch 1 - 16)
Spot out
(Ch 25 - 32)
www.digiop.com
