Speed Dome Camera Instruction Manual
20/49
Preset
z
Function
MAX. 127 positions are programmable. The Preset number can be
assigned from 1 to 128 except 95. Preset 95 is reserved for entering
into OSD menu. Camera parameters such as White Balance, Auto
Exposure and others can be set up independently and each preset
can have its own parameter values independently from the other
persets. When setting up presets with a controller, Label should be
blank and "Camera Adjust" should be set to "GLOBAL" as the default.
To change the parameters, enter into OSD menu.
z
Setting Presets
Set Preset [1~128]
z
Running Presets
Go Preset [1~128]
z
Deleting Presets
To delete Presets, enter into OSD menu.
Swing
z
Function
This function is that the camera moves repetitively between two
preset positions at programmed speeds. When a swing function runs,
the camera moves from the preset assigned as the 1st point to the
preset assigned as the 2nd point in CW(Clockwise) direction. Then
the camera moves from the preset assigned as the 2nd point to the
preset assigned as the 1st point in CCW(Counterclockwise)
direction.
In case that the preset assigned as the 1st point and the preset
assigned as the 2nd point are same, the camera turns on its axis by
360
°
in CW(Clockwise) direction and then it turns back on its axis by
360
°
in CCW(Counterclockwise) direction. The Swing speed is
defined from 1
°
/sec to 180
°
/sec.
z
Setting Swings
To set Swing, enter into OSD menu.
z
Running Swings
Method 1) <Run Pattern> [Swing NO. + 10]
Method 2) <Go Preset> [Swing NO. + 140]
ex) Run Swing 3 : <Run Pattern> [13]
ex) Run Swing 3 : <Go Preset> [143]
z
Deleting Swings
To delete Swings, enter into OSD menu.
1st Preset
2nd Preset
1
CW
Di
rec
tio
n
2
CC
W
Dir
ec
tio
n
OPERATION
3
