Digimerge DPD24DL, Instruction Manual

Page: 11 / 14

-17- -16-
CAMERA ADJUSTMENT CAMERA ADJUSTMENT
LEVEL 000-255
The actual variable range is limited to the range from the low color temperature
(approx. 1800K) to the high color temperature (approx. 10500K).
Default setting is 58
• PUSH LOCK
Press down on joystick to set current scene as the white
balance level. Use a grey card in front of lens to give a
natural white level.
PICT ADJUST
SETUP MENU
LANGUAGE ENGLISH
LENS AUTO

WHITE BAL ATW

PICT ADJUST

NR

NEXT

EXIT

SAVE ALL

PICT ADJUST
MIRROR OFF
BRIGHTNESS 000
CONTRAST 128
SHARPNESS 128
HUE 128
GAIN 150
RETURN 
•
MIRROR:
ON / OFF
•
BRIGHTNESS:
000-255 Screen brightness.
•
CONTRAST:
000-255 Screen contrast.
•
SHARPNESS:
000-255 Screen sharpness.
•
HUE:
000-255 Adjust the hue.
•
GAIN:
000-255
Adjust the gain.
Activates color rolling suppression.
MANUAL WB
LEVEL 058
RETURN

Picture and display control settings
DA Y/NIGHT
AUTO / BW

/ EXT1 / EXT2 /COLOR
SETUP MENU
EXPOSURE AUTO

PICT ADJUST

WHITE BAL ATW

WDR

DNR

DAY/NIGHT EXT1
PRIVACY

MOTION DET

OTHERS

EXIT

SAVE ALL
Day/Night mode can be set to the following options: COLOR/AUTO/EXT/BW. Select
COLOR for a color image or BW for black and white. EXT1/EXT2 allows the use of an
external trigger to activate day/night operation. Use AUTO to have the camera
automatically adjust for Day/Night mode.
NOTE: Day/Night should be set to EXT1 on models with IR LEDs. EXT1 is used to sync
IR LED operation when going into B/W mode.

DAY/NIGHT
BURST OFF
DELAY CNT 003
DAY - NIGHT 002
NIGHT - DAY 005
RETURN

AU TO

DELAY CNT
000-255
DAY - NIGHT
000-255
Threshold for Night status from day status.
NIGHT - DAY
000-255
Threshold for the Day status from night status.
•
•
•
B / W

B/W SETUP
BURST ON
IR OPTIMIZER ON
MODE AUTO
LEVEL 16
RETURN

BURST
ON / OFF
Selects whether to output the burst signal when night
•
Allows additional Smart IR settings to be enabled.
MODE
AUTO / CENTER
When IR Optimizer is ON, set Front Light Compensation F C
feature to center of image or automatic area. om
• IR OPTIMIZER
ON / OFF Turn Smart IR feature ON/OFF.
•
LEVEL
Adjust Level for Smart IR
•
•
MAN UAL WB
ANTI CR
Smart IR must be enabled/disabled through the B/W menu. Smart IR is enabled by
default on models with IR LEDs, and works when Day/Night is set to EXT1, Auto, or
B/W.