74
Hard Drive Replacement / Addition - Appendix #7
New Hard Drive Format
The New Hard Drive MUST be formatted.
If a new
HARD DRIVE
is detected, the
system will prompt you to FORMAT the
drive. If you do not choose to format the
HARD DRIVE, the drive will not be
detected by the system.
If you choose to FORMAT a drive in this
way, the drive will no longer be readable by
a regular PC without using the
HARD
DRIVE VIEWER
software included on the
CD provided with this unit.
NOTE:
Do NOT turn off the System while
the drive is formatting. This can cause
problems with the Hard Drive.
Adding a Second Hard Drive
• Remove the Drive Bracket from the DVR by removing the 4 screws
• Set the Jumpers on the secondary Hard Drive to SLAVE. Refer
to the General Jumper Pin Setting on HDD Surface (generally
located on a sticker on the top of the drive).
NOTE: Use a Hard Drive Model with a power supply rated
UDMA66 or higher.
• Connect the Cables to the drive, and secure the Drive to the
Bracket. Screw the bracket into the case.
