Hybrid Inverter Users’ Manual
Page | 2
1.
Introduction
Thank you for purchasing the 1500 Watt Hybrid Inverter. Connected to the 12 volt
battery, the 1500W Hybrid Inverter turns out to be AC pure sine wave power through
isolation. This advanced product uses the MCU chip control technique, applying the
most secure and stable control algorithm design, to improve the output parameters of
the inverter to a new level. Also, this product and electrical appliances are well
protected by the multiple protection features. The applicability of this inverter can be
broadly used at households, schools, camping, flood preventions, communications,
first aids, islands and other places without power supply. Please read the instructions
carefully to ensure proper operation and save it for future reference.
2.
Safety Precautions
■
The inverter can connect only to 12 volt battery and 12 volt DC power supply.
Otherwise, it may cause product damage with inappropriate power supply.
■
The inverter can convert 12 volt DC into 230 volt AC. The 230 volt AC can
NOT be converted to 12 volt DC to only charge the battery bank that is connected.
■
Do NOT place the inverter near flammable materials or any location which
accumulate flammable fumes or gases. It has excellent thermal tolerance but might
overheat after working for a long time. Please keep the inverter 15 cm (6 inch)
away from other objects and place it in a clean and well-ventilated location.
■
Do NOT operate the inverter with wet hands and do NOT expose it to rain or
moisture.
■
To prevent the risk of electric shock or sparkle, the plug must be securely
connected to the outlet.
■
Any unauthorized repaire or disassembly may result in electric shock and void
of warranty.
3.
Product Features
☆
The power supply is controlled by the intelligent chip (MCU).
☆
12
volt DC being converted to high-voltage DC power ends up as AC power.
☆
It can charge from either solar power or AC mains. The solar power is given
priority by the MCU, considering energy saving.
☆
The cooling fan in the inverter is thermally activated and turns on when the
inverter becomes warm.
☆
Press the AC / DC priority switch to input either AC or DC power.
☆
The AC mains have priority over the inverter and solar mode.
(Factory default
setting)
