LDR-CV-15A-1CH - High Current PWM Repeater
User Manual
3.0 - 24 November 2020
Page 2 of 3
+617 3899 1267
Table Of Contents
Notes
•
Install in a dry sheltered position
•
Interior use only
•
Ensure adequate ventilation
•
Installation should only be performed by a qualified professional
•
Install in accordance with all appropriate wiring standards
•
Never connect a LED fitting to a driver that is powered. Doing so may result in damage to the LED.
•
Always make sure the output voltage range and output current of the LED driver match the
requirements of the LED fitting. Failure to do so may result in damage both the driver and fitting.
Introduction
The LDR range provides a cost-effective means to expand a LED dimming system without the need for
extra protocol receivers, by simply repeating the input PWM signal. The constant voltage version switches
up to 15A, making it suitable for higher current fittings and strips.
Specifications
Physical
U n i t s
Dimensions
115 x 36 x 30
mm
Weight
100
g
