Focus 48 - LED Lighting Profile
Installation Guide
digilin.com.au
+617 3899 1267
Page 3 of 3
Extrusion interconnects
1.
Remove all covers
2.
Remove gear trays
3.
Loosen keyways
4.
Align extrusions together
5.
Slide internal keys ways across 50/50 into each
extrusion.
6.
Re-tighten Keyways.
7.
Re-install gear tray, making cable
interconnects, as necessary.
8.
Re-install cover
Note: Drivers should not be covered. Drivers rely on convection air flow for cooling and covering them may cause them to enter thermal regulation.
For any technical information relating to the connection of these luminaires to dimming systems, refer to LED products at
