10/1/2020
B200/B210/B200mini/B205mini - Ettus Knowledge Base
https://kb.ettus.com/B200/B210/B200mini/B205mini
7/18
The USRP B200/B210/B200mini/B205mini are derived from the Analog devices AD936x
integrated transceiver chip, the overall RF performance of the device is largely governed by
the transceiver chip itself.
RF Performance
SSB/LO Suppression -35/50 dBc
Phase Noise 3.5 GHz 1.0 deg RMS
Phase Noise 6 GHz 1.5 deg RMS
Power Output >10dBm
IIP3 (@ typ NF) -20dBm
Typical Noise Figure <8dB
Maximum Input Power: 0 dBm
Input/Output Impedance
All RF Ports are matched to 50 Ohm with -10dB or better return loss generally. Detailed
test is pending.
Input Power Levels
The maximum input power for the B200/B210/B200mini/B205mini is 0 dBm.
RF Performance Data
B200mini / B205mini
Media:B200mini B205 RF Performance Data 20160119.pdf
B200 / B210
Hardware Specifications
Ettus Research recommends to always use the latest stable version of UHD
B200
Current Hardware Revision: 6
Minimum version of UHD required: 3.8.4
B200 Rev 5 (AD9364-based board) requires minimum UHD 3.8.4
Digilent Part Number: 6002-410-021
Digilent Part Number: 6002-410-021
