10/1/2020
B200/B210/B200mini/B205mini - Ettus Knowledge Base
https://kb.ettus.com/B200/B210/B200mini/B205mini
16/18
National Instruments is in compliance with the Chinese policy on the Restriction of
Hazardous Substances (RoHS) used in Electronic Information Products. For more
information about the National Instruments China RoHS compliance, visit
ni.com/environment/rohs_china.
Certifications for European Union
In order to ensure compliance with EU certifications for radio equipment, a ferrite bead
(included in kits with NI part number 785825-01 and 785826-01) should be affixed onto
the GPIO cable, if in use. This is achieved by opening the snap-on ferrite bead and
enclosing it around the GPIO cable(s).
In addition to the part numbers listed above, these ferrite beads can be sourced through
Fair-Rite using part number 0443164251.
Certificate of Volatility
B200/B210
Media:volatility USRP B200 B210 r1.pdf
Downloads
FAQ
This is a list of frequently asked questions on the USRP B200/B210/B200mini. If you have
questions that are not answered in this document, please contact us - [email protected].
Will the USRP B200/B210 work with USB 2.0?
Yes, both the USRP B200 and USRP B210 will fall back to the USB 2.0 standard if a USB 3.0
port is not available. There are several things to consider. First, the USB 2.0 data rates are
slower. Depending on the USB controller, operating system, and other factors, you may
achieve a sample rate up to 8 MS/s with USB 2.0. Also, you may not be able to bus-power
the USRP B200/B210 in USB 2.0 mode.
What samples rates should I expect with USB 3.0? USB 2.0?
The performance and throughput of USB 3.0 can vary between host controllers. Ettus
Research recommends using the Intel Series 7, 8, and 9 USB controllers. In Linux, the
command
lspci
will show the USB controller on the system.
Digilent Part Number: 6002-410-021
Digilent Part Number: 6002-410-021
