DR5013 DIGIREVERSE
P 18
www.digikeijs.com
® R
-
Bus, B
-
Bus
are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS
-
Bus is a trademark registered in the name of Lenz
Stand 2021
-
07
-
06
1
2
4.5 LocoNet® Features
1)
LocoNet® Feedback Monitor.
The different colors indicate the different feedback busses.
2)
Slow Module Timing
This option can be activated if there are problems with Loconet.
3)
RailCom Report.
Here you select which LocoNet commands are used to send the RailCom message.
MULTI_SENSE_Standard
The original OPC_MULTI_SENSE command is used (Digitrax and Bluecher compatible).
There is a restriction of the address ranges "locomotive address or block address" when the derailing direction is sent.
MULTI_SENSE_Long
The new OPC_MULTI_SENSE_L command is used: No restriction of the address ranges.
MULTI_SENSE_Both
Both commands (Long and Standard) are transmitted to the central unit.
4)
RailCom Sense direction.
Here you can select how the derailment direction is reported to the control panel in the case of "MULTI_SENSE_Standard".
off
No rerail direction is transmitted.
in Blockadresse
The track
-
laying direction is transmitted in the block address (restriction of the block addresses to a maximum of 2048).
in Lokadresse
The track
-
laying direction is transmitted in the locomotive address (restriction of locomotive addresses to a maximum of
4095).
5)
Accept current settings.
6)
Cancel.
5
6
3
4
