Digikeijs DR 4088LN Series Instruction Manual Download Page 11

Page: 11 / 15

DR4088LN

CS / GND / OPTO

2021

P 11

www.digikeijs.com

® R

Bus, B

Bus

are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS

Bus is a trademark registered in the name of Lenz

4.1 Feedback modules DR4088LN

CS; 2

wire track

® R

Bus, B

Bus

are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS

Bus is a trademark registered in the name of Lenz

DR5000 in conjunction with LocoNet® feedback modules (DR4088LN

CS)

In this example the LocoNet® modules DR4088LN

CS (current sensor principle) are used.

These feedback modules are connected to the DR5000 via LocoNet®. A maximum of 128
modules with 16 inputs each can be connected to the LocoNet T socket of the central unit.

A total of 2048 feedback modules are thus possible.

All other connected feedback modules which are connected via ext88N or R

Bus® must be

disconnected from these 2048 feedback modules.

Please note that a DDR4088LN

xx can manage a maximum of 15 DR4088.

DR4088LN CS

Other LocoNet®

components

More S88

feedback unit

Summary of Contents for DR 4088LN Series
















Search results

Summary of Contents for DR 4088LN Series

Reviews:

Brands by name

Popular brands

Digikeijs DR 4088LN Series, Instruction Manual

Search results

Summary of Contents for DR 4088LN Series

Reviews:

Brands by name

Popular brands