DK50018
-
Bluetooth accessory and switching decoder Bluetooth connection
DK50018
-
Bluetooth accessory and switching decoder
www.digikeijs.com
*R
-
Bus, B
-
Bus are registered trademarks of Modelleisenbhan GmbH. XpressNet and RS
-
Bus are registered trademarks of Lenz 24
www.digikeijs.com
4.1.3 Z21 App —
POM programming
*
In the following example we will program the DK50018
to use preset 2 using CV47—
Value 2
1.
Connect the DK50018 to the output of the z/Z21
main channel.
2.
Open CV programming —
>
Manual —
>
POM in
the Z21 App.
3.
Press the programming button on the DK50018.
The Yellow LED will be lit
4.
On the Z21 app, set the Loco address to 9999 and
change CV address to 47 and CV value to 2.
5.
Hit the Set CV button and your change will be
written to the DK50018
6.
Press the program button on the DK50018 button,
the yellow led on the DK50018 should go off which
means that the DK50018 has closed programming
mode and now has preset 2 as active preset.
*:POM stands for Program On the Main and corresponds to the direct programming on the track or "track output" of the control unit.
