PCX924e & PCX924e-Mic, PCX22e
User manual
11
To do so, install the driver with the command line: “
setup x_topology
” (not
available under Windows Vista). For detailed information, please refer to the
dedicated document on our web site.
•
Shut down your computer and insert your PCX card.
•
Restart your computer.
•
Click on Cancel if the “Found New Hardware” Wizard appears.
•
Double-click on the HR Runtime vxx.msi/HR Runtime vxx.msi
for Vista icon to launch the driver installation.
•
A welcome message is displayed, click Next to continue.
•
The “License Agreement” window appears: read it, and click on
“I accept the terms in the license agreement”
to approve it.
•
Do the same in the next window for Virtual PCX and PC Codec
Legal Notice.
•
In the “Custom Setup” window, the “
Drivers for the HR board
s” are
displayed; by default, both WDM DirectSound and ASIO HR are
installed.
To install the Wave driver
∗
, select ‘Wave’.
Next.
•
In the “Ready to Install the Program” Window, click on Install to
start copying the files.
•
Note: In case you use an unsigned driver version, the
“Digital Signature Not Found” message may appear
because a non-Microsoft software is about to be installed.
Click on Continue in the “Hardware installation”
window (Windows XP, Server 2003).
•
Under Windows Vista:
Click Allow in the “User Account Control” window.
Click Install
in the
“Windows Security” window.
•
In the “Digigram drivers” window, select the number and the size
of buffers required by your applications. Click on Ok.
•
Click Finish to complete the driver installation.
Parameterizing the ASIO driver
Note: for most current ASIOand Wave applications (e.g. Cubase, Nuendo,
Winamp, etc...) you have the choice between a 32-bit version and a
64-bit version when installing them under Windows
≥
Vista. For
operation with your sound card, make sure to use the 32-bit version!
∗
Windows XP and Server 2003 only; for Windows Vista, a Wave driver is available on
request.
