Digiever IDS-T16000-RM, User Manual

Page: 77 / 88

76
another without configuring system manually. Users can select Load Type as “ Load Default
Settings ” or “ Load Configuration .”
Once you select “ Load Default Settings ” and click “ Apply, ” configuration of Camera Setting ,
Recording Settings , Event Management Setting , E-Mail settings , and Server Settings will
reset to default.
When you select “ Load Configuration, ” please select Volume ( Local USB device or PC
folder ) and browse the folder to find the saved configuration. Once file name displayed,
click “ Apply ” to load configuration.
5.7.4 Buzzer/Digital Output
Select “ Enable ” or “ Disable ” to set Buzzer Notice.
Once the buzzer notice is enabled, the buzzer will have beep sound in HDD or iSCSI Server
hardware failure situation.
Note : To stop the buzzer sound, user can press “ USB BACKUP ” button on the front panel
of iSCSI Server for one second.
For external devices that are unable to alter its voltage, users can flexibly change initial
value (High or Low voltage) on iSCSI Server’s digital output.
Users can click “ Signal Reset ” button to stop the trigger of digital output when DO is in
continuous notification mode.