Digiever IDS-T16000-RM User Manual Download

Page: 63 / 88

means if an event is lasting for one minute, iSCSI Server will send email 3 times per

every 20 seconds.

(2)

Digital Output

Buzzer

can be enabled up to sound for 60 seconds.

Digital Output1

and

Digital Output2

can

be enabled from 3 second to continuous warning.

Note

: User can press “

USB BACKUP

” button on the front panel of iSCSI Server for one

second to stop the buzzer beeping.

(3)

User Defined Action (HTTP-out)

User Defined Action

allows users to send the specific HTTP command out when an event is

triggered in order to manage devices such as power controller, fire/smoke protection device,

etc.

(4)

SMS

stands for Short Message Service.

Users can be notified by short message
service while the event is triggered. The

Summary of Contents for IDS-T16000-RM
























































































Search results

Summary of Contents for IDS-T16000-RM

Reviews:

Related manuals for IDS-T16000-RM

Brands by name

Popular brands

Digiever IDS-T16000-RM, User Manual

Search results

Summary of Contents for IDS-T16000-RM

Reviews:

Related manuals for IDS-T16000-RM

Brands by name

Popular brands