manualshive.com logo in svg

DigiDesign Drawmer Dynamics, Owner'S Manual

Share
Download
DigiDesign Drawmer Dynamics Owner'S Manual Download Page 5

 

Chapter 1:  Introduction

 

1

 

chapter 1

 

Introduction

 

Thank you for purchasing the Drawmer Dynam-
ics plug-in for Pro Tools|HD systems. 

Based in England, Drawmer has a longstanding 
reputation for creating high-quality, industry-
standard, analog and digital signal processing 
devices, including microphone preamplifiers, 
esoteric tube equipment, equalizers, and most 
significantly, dynamics processors. 

The Drawmer Dynamics plug-in is a real-time 
TDM plug-in that retains the look and sound of 
Drawmer’s renowned hardware units, specifi-
cally, the highly-acclaimed Drawmer DS201 and 
DL241.

There are two configuration of the Drawmer Dy-
namics plug-in:

• DrawmerECL, providing an Expander, 

Compressor, and Limiter

• DrawmerGCL, providing a Gate, Compres-

sor, and Limiter

 

Contents of the Boxed 
Version of Your Plug-In

 

Your Drawmer Dynamics plug-in package con-
tains the following components:

• Installation CD-ROM

• License card (for installing Drawmer Dy-

namics plug-ins with an iLok USB Smart 
Key, not supplied)

•

 

Drawmer Dynamics Plug-Ins Guide

 

 (elec-

tronic PDF guide)

• Registration information card

Summary of Contents for Drawmer Dynamics








































Reviews:

No comments

Brands by name

Popular brands

Load more brands