ATTENTION:
in the central slot, destined to the passage of cables, it is
necessary to measure the cables according to the opening's size.
TIP
: As an optional item, Digicon can provide a steel template for the
fixation of Catrax Fit, containing the exact demarcations of the necessary
holes.
2. Clean the holes, removing any debris from drilling.
3. Place the external part of the bolts in the holes. Leave about 25mm of the bolt out
of the hole.
4. Position the column and fasten it to the floor with the four screws that accompany
the bolts. Use a flex-head socket wrench with ¾'' or an articulated socket wrench.
5.4 Assembling the arms
After drilling the floor and assembling the column, it is possible to assemble the arms
and plastic covers.
The image below shows the specific parts of C
Fit's arms and upper frontal
atrax
cover.
TIP
: We recommend the bolts by the brand Tecnart, model AF38110,
3/8x4''.
Screw M3x8
Screw M3x16
Upper plastic
cover
Flat washer M3
Arm
*Screws
’
access cover
*Screw Allen M6x20
*Lock washer M6
