DQ & MQ-Rack User Guide
1.5 Using the Q-Rack Menu System
13
Oscillators Menu........................................................................
In the
Oscillators
menu, the user can apply the rac
k’s internal
oscillator signal all output sockets. To enable the
oscillator, select the out option, hold the right button down and a bar next to the word
OFF
will begin to fill,
when the bar fills, the word will change to
ON
and signal will be applied to all 24 outputs.
From within the
Oscillators
menu one of 8 frequencies can be selected between
20Hz
and
20KHz
, on default
settings the frequency is set to
1KHz
.
The level of the oscillator can also be changed to be a range of volumes between a value of
-96dB
and
0dB
, at
default setting the level is
-96dB
.
PSU Status Menu .........................................................................
The
PSU Status
menu page shows readings for all rack PSU voltages. No adjustments are possible from this
menu.
Version Menu .................................................
The
Version
menu page shows the software versions of the
Host
and
FPGA
currently installed in the rack.
No adjustments are possible from this menu.
MQ-Rack version menu
On the DQ-Rack there are additional versions displayed, for the
DNT
and
Dante
software versions.
DQ-Rack version menu
