Digicam Premium DPA-0440L, User Manual

Page: 26 / 163

User Manual of DPA-xxxx Series DVR
25
3.2 Operations in Live View Mode
In live view mode, the following functions can be realized:
•
Single Screen : showing only one screen on the monitor.
•
Multi-screen: showing multiple screens on the monitor simultaneously.
•
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each
screen on the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
•
All-day Playback : play back the recorded videos for current day.
•
Start Recording : start all-day normal recording or motion detection recording for all channels.
•
Aux/Main Monitor switch: the DVR will check the connection of the output interfaces to define the
main and auxiliary output interfaces. When both HDMI and VGA are connected, , or either one is
connected, the CVBS is used as the auxiliary video output for live view, recording and PTZ controls;
When both HDMI and VGA are not connected, the CVBS is used as the main video output for live view
playback, recording, PTZ control and menu operations.
When the aux output is enabled, you can do some basic operation on the live view mode for the Aux output,
while no operation is allowed for the main output.
3.2.1 Using the Mouse in Live View
In the live view mode, right click on the screen or move the mouse to the bottom of the screen, the main menu
button and the live view toolbar appears:
Figure 3.1 Menu under Live View Mode
Table 3.2 Mouse Operation in Live View
Icon Icon Icon Icon Name Name Name Name Description Description Description Description
Main Menu Enter the main menu of the system.
Single Screen Switch to the single full screen live view mode.
Multi-screen
Switch to multi-screen live view mode.
The multi-screen icon varies according to the device models.
Normal Record Start
all-day normal recording for all channels.
Motion
Detection
Record
Start
motion detection recording for all channels.