Digicam Premium DPA-0440L, User Manual

Page: 113 / 163

User Manual of DPA-xxxx Series DVR
112
By default, the Cloud P2P is enabled.
Configuring Cloud P2P
Purpose:
Cloud P2P provides the mobile phone application and as well the service platform page to access and manage
your connected DVR, which enables you to get a convenient remotely access to the surveillance system.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2.
Select the
Extranet Access
tab to enter the Cloud P2P Settings interface.
3.
Check the
Enable Cloud P2P
checkbox to activate this feature.
4. If required, check the Enable Stream Encryption checkbox to encrypt the video stream.
When the stream encryption is enabled, the correct stream key must be used before you view the live video
via Web browser or iVMS-4200 client software.
5. Enter the verification code of the device.
The verification code consists of 6 capital letters and is located at the bottom of the DVR.
The device at the version 2.2.13 or above has its verification code automatically available in the
filed by default; for device of older version, you need to input any 6 capital letters in the text filed.
Figure 9.4 Cloud P2P Settings Interface
6. Click the Apply button to save and exit the interface.
After configuration, you can access and manage the DVR by your mobile phone on which the Cloud P2P
application is installed or by the Cloud P2P website (www.hicloudcam.com).
For more operation instructions, please refer to the help file on the Cloud P2P website
(www.hicloudcam.com).
Configuring DDNS
Purpose: