Contents
XBee/XBee PRO DigiMesh 2.4 Getting Started Guide
DigiMesh networks
5
Synchronous sleeping network
5
Mesh networking
6
Do more with your XBee devices
Update the firmware of your XBee modules
8
Configure remote XBee modules
8
Set up and perform a range test
9
Configure the XBee modules for a range test
9
Perform a range test
10
Set up basic encryption for your XBee network
13
Troubleshooting
Cannot install device driver
16
Potential cause
16
Resolution
16
Use LEDs to identify XBee modules
16
Resolution
16
No remote devices to select for a range test
16
Check cables
16
Check that the XBee module is fully seated in the XBee development board
16
Check the XBee module orientation
17
Check that the XBee modules are in the same network
17
Restore default settings
17
Port in use
17
Potential cause
17
Resolution
17
XCTU can't discover devices
17
Check the configuration of your USB serial converter
17
Check cables
18
Check that the XBee module is fully seated in the XBee development board
18
Check the XBee module orientation
18
Check driver installation
18
Check if the modules are sleeping
18
XCTU cannot discover remote devices
18
Potential cause
18
Resolution
19
XBee DigiMesh 2.4 Getting Started Guide
3
