Digi NetSilicon Connectware Connect Series, User Manual

Page: 22 / 37

Chapter 4 Configuring Network Communications 23
Send data
when the fol-
lowing string
is found
Check this to field to trigger UDP communication when
one of the following strings appear in the data stream:
•
CR (carriage return)
• CR/LF (carriage return/linefeed)
• Custom String, which can be a string of one to four
characters. To use hexadecimal values use \xhh,
where hh is replaced with a hexadecimal number.
Send data
after the fol-
lowing num-
ber of idle
milliseconds Check this field if you want the product to send the
buffer after waiting a specified period for additional
data. Then specify the period to wait. The range is 1 to
65535 milliseconds, and the default is 100 millisec-
onds.
Send data
after the fol-
lowing num-
ber of bytes Check this field and then specify the maximum number
of bytes the buffer can accumulate before forwarding
the contents. The range is 1 to 65535 bytes, and the
default is 1024 bytes
Setting Description