Digi NetSilicon Connectware Connect Series, User Manual

Page: 20 / 37

Chapter 4 Configuring Network Communications 21
Procedure
1. Access the web interface by entering the product’s IP
address in a browser’s URL window.
2. Choose Serial Ports from the Configuration menu.
3. Choose the Basic tab and configure serial communication
settings. When you complete this task, choose Save.
4. Choose the TCP tab and then configure TCP Client set-
tings. Use the following table for information on settings.
When you are done choose Save.
Setting Description
Automati-
cally estab-
lish TCP
connections Check this field if you want the product to trigger auto-
matic TCP connections to the server identified on the
Connect To field. Connections will be triggered by the
event specified in the Connect field.
Connect
Configure the event that will trigger a connection:
•
Always means a connection is always available.
If lost, the connection will be reestablished auto-
matically.
• Data means the product initiates a connection
whenever data arrives on the serial port.
• DSR means a connection is made when the
serial port's DSR signal goes high.
• DCD means a connection is made when the
serial port's DCD signal goes high.
Connect to
Specify the IP address of the server to which a con-
nection will be made.
Service Configure the type of service to use.
TCP Port
Number Configure the TCP port number for this connection.
Use the port number required by the application.