Install Guide
Model: MIL-250FXC 3
The lines tapped will not affect the signal integrity or loading factor. Incoming
data from either the DCE and DTE lines are regenerated before transmission.
The tapped data is fed to two transceivers for the LAN analyzer’s connection.
Signal integrity is guaranteed for the lines, and the connection to the LAN
analyzer.
Figure 1. MIL-250FXC Possible Connections
I n d i c a t o r s
There are 5 LED indicators on the MIL-250FXC:
•
P1SD
: Port 1 Signal Detect. This LED illuminates when the MIL-250FXC
receives a signal on port 1. It is yellow.
•
MP1SD
:Monitor Port One Signal Detect. This LED illuminates when the
device receives a signal on Monitor Port One. It is yellow.
•
PWR
: Power. This LED illuminates when the device is powered up (using
the power supply adapter). It is green.
•
MP2SD
:Monitor Port Two Signal Detect. This LED illuminates when the
device receives a signal on Monitor Port Two. It is yellow.
Server
(or Fast Ethernet Device)
250FXC_002
Scale=0
Fast Ethernet
Device
LAN Analyzer
(or monitoring device)
LAN Analyzer
(or monitoring device)
Port 1
Port 2
Monitor
Port 2
PS
5 V DC
1.5 A
P1SD
PWR
MP2SD
P2SD
MIL 250FXC
100 Base FX
Tranceiver Tap
SC Connector
SWITCH
Port 1
Port 2
Monitor
Port 1
MP1SD
